Cerarl

This is a wall material with high solidity and design. The material demonstrates its usefulness for various apllications including repairs. Certificated as a classification of non - combustible material by the minister of land , infrastructure , Transport of japanese government NM-2183

Download Catalogue

USPs

Easy to install

Good machinability

Easy maintenance

Excellent stain resistance

Water Resistant

Hygienic And Sanitary

Discover our Designs

Shade Image

CFN 10241ZD

Finishes

  1. Suede Finish (SF)

  • Standard Size (mm): 2455 mm X 935 mm
  • Standard Size (ft): 8' X 3'
  • Thickness: 3 mm
Shade Image

CFN10242ZN

Finishes

  1. Suede Finish (SF)

  • Standard Size (mm): 2455 mm X 935 mm
  • Standard Size (ft): 8' X 3'
  • Thickness: 3 mm
Shade Image

CFN10243ZD

Finishes

  1. Suede Finish (SF)

  • Standard Size (mm): 2455 mm X 935 mm
  • Standard Size (ft): 8' X 3'
  • Thickness: 3 mm
Shade Image

CFN10244ZD

Finishes

  1. Suede Finish (SF)

  • Standard Size (mm): 2455 mm X 935 mm
  • Standard Size (ft): 8' X 3'
  • Thickness: 3 mm
Shade Image

FAN1729ZMN

Finishes

  1. Suede Finish (SF)

  • Standard Size (mm): 2455 mm X 935 mm
  • Standard Size (ft): 8' X 3'
  • Thickness: 3 mm
Shade Image

FJ-1788ZN

Finishes

  1. Suede Finish (SF)

  • Standard Size (mm): 2455 mm X 935 mm
  • Standard Size (ft): 8' X 3'
  • Thickness: 3 mm

Applications

Home & Office Furniture

Wall Panelling

Wardrobes & Closet Interiors

Office Partitions & Shelves

Hotels & Restaurants

Kitchen Countertops & Backsplashes

Gallery

Heat

Although laminates are tested to a temperature of 180 degrees care should be taken to avoid prolonged exposure to high temperatures. Objects such as oven-hot pans and dishes should not be taken from direct heat and placed directly on the laminate. Burning cigarettes should never be left on the surface. This information will assist in ensuring that surfaces faced with poly grey high-pressure decorative laminate will give good service for many years.

Polish

Polish should not be applied to the surfaces, since it can lead to smearing and marking,particularly on horizontal surfaces.

Scratching

Scraping with sharp edges should be avoided and objects with rough or uneven bases can cause scratches if allowed to slide across the surface. Food should not be chopped on a working surface; the use of a chopping board will prevent permanent damage.

Cleaning

Wipe with a damp cloth or a cloth dipped in mild detergent and water. Clean with washing powder or bleach.Use a melamine sponge with water and wipe but do not scrub too heavily, as that can cause changes in the sheen of HPL products.Remove with an organic solvent such as methylated spirits, acetone, benzene, and nail varnish remover.