Fabric Phenolic Laminates

These are laminated sheets made from layers of woven cotton fabrics using themo settting synthetic raisin as the bonding medium. These are graded accoding to coarseness of cloth and electrical properties.

Download Catalogue

USPs

Easy to install

Good machinability

Easy maintenance

Excellent stain resistance

Water Resistant

Cost Effective

GradesCharacteristicsApplications
FF2General purpose grade with good machinability and mechanical strength. Very good strength and weight ratio.Shuttles, Gears, Pulleys, Automobile Couplings
FF3High impact resistance, good mechanical strength, and adequate machinability.Heavy duty gears, Pulleys, Piling dolly, Workbench tops, Rolling mill bearings, etc.
FF2/ESVery good dielectric properties, good mechanical strength, and excellent machinability.Armature wedges, Generator slot-wedge insulation, etc.

Applications

Home & Office Furniture

Wall Panelling

Wardrobes & Closet Interiors

Office Partitions & Shelves

Hotels & Restaurants

Kitchen Countertops & Backsplashes

Gallery

Heat

Although laminates are tested to a temperature of 180 degrees care should be taken to avoid prolonged exposure to high temperatures. Objects such as oven-hot pans and dishes should not be taken from direct heat and placed directly on the laminate. Burning cigarettes should never be left on the surface. This information will assist in ensuring that surfaces faced with poly grey high-pressure decorative laminate will give good service for many years.

Polish

Polish should not be applied to the surfaces, since it can lead to smearing and marking,particularly on horizontal surfaces.

Cleaning

Wipe with a damp cloth or a cloth dipped in mild detergent and water. Clean with washing powder or bleach.Use a melamine sponge with water and wipe but do not scrub too heavily, as that can cause changes in the sheen of HPL products.Remove with an organic solvent such as methylated spirits, acetone, benzene, and nail varnish remover.