Easy to install
Sunmica Insulator Panels
With the spreading awareness of interior decor for offices and homes,SUNMICA INSULATOR PANELS are foud ideal for concealed and panelled wiring that's flush with the wall. The back of this panel is in glossy finish.
SUNMICA INSULATOR PANELS are industrial laminates composed of Kraft paper that is impregnated with a specially developed phenolic resin. These are consolidated with melamine overlays on either side for appealing aesthetics,abrasion and anti-tracking properties ata a pressure of around 1600 PSI and 140 C. SUNMICA INSULATOR PANELS are supplied in sheet form in a standard size of 1220 mm X 1220 mm with a thickness of 3 mm. These come in a range of shades in glossy melamine finish to enhance insulation properties and teh aesthetics of the board.
Download CatalogueUSPs
Good machinability
Easy maintenance
Excellent stain resistance
Water Resistant
Cost Effective
Applications
Home & Office Furniture
Wall Panelling
Wardrobes & Closet Interiors
Office Partitions & Shelves
Hotels & Restaurants
Kitchen Countertops & Backsplashes
Gallery
Heat
Although laminates are tested to a temperature of 180 degrees care should be taken to avoid prolonged exposure to high temperatures. Objects such as oven-hot pans and dishes should not be taken from direct heat and placed directly on the laminate. Burning cigarettes should never be left on the surface. This information will assist in ensuring that surfaces faced with poly grey high-pressure decorative laminate will give good service for many years.
Polish
Polish should not be applied to the surfaces, since it can lead to smearing and marking,particularly on horizontal surfaces.
Cleaning
Wipe with a damp cloth or a cloth dipped in mild detergent and water. Clean with washing powder or bleach.Use a melamine sponge with water and wipe but do not scrub too heavily, as that can cause changes in the sheen of HPL products.Remove with an organic solvent such as methylated spirits, acetone, benzene, and nail varnish remover.